
Flex Fence Louvre Kit
£65.00
FLEXfence is a unique and exciting louver system that lets you customize your landscaping. Create unique louvered designs and patterns without the problems associated with spacing and fitting boards.
- All fastening hardware
- 2 pieces of 4-foot rails
- 22 Brackets
- 1 Operating Bar
- Easy to follow instruction sheets
Please note that the Flex Fence kit doesn’t include the wooden slats it is just the kit mechanism.
FLEXfence is made from recycled PVC, is U.V. stabilized, and has excellent strength qualities.
FLEXfence is available in 4-foot standard kits that can be easily sized to meet your needs.
Please note our kits can come packaged with up to 3 kits per box.
The Most Frequently Asked Questions
What size timber do the brackets accommodate?
The brackets can be altered to accommodate boards slightly larger by easily removing the ends but we recommend staying close to the sizes above.
Can it be mounted horizontally between pergola rafters?
It is very important that the boards are not too long a span to prevent them from sagging.
Is the FLEXfence Louver System made out of metal?
What size timber do the brackets accommodate?
The brackets can be altered to accommodate boards slightly larger by easily removing the ends but we recommend staying close to the sizes above.
What is the maximum horizontal span for the slats?
What is the maximum vertical span for the slats?
Can FLEXfence be used with composite boards?
How do I put together several 4ft kits of FLEXfence so it looks like a continuous run?
Will the FLEXfence kit keep out the rain when used on a pergola roof?
Awnings and overhangs are not waterproof. Water will drip on the sides (where brackets and rails meet). There is no protection against driving rain.
Can these be cut or added in line to make a 6 foot tall privacy screen?
When cutting and butting together make sure to cut the adjoining ends to create a 4″ or 100mm space between the center holes. Should you wish to move all the louvers together you can make a connector piece from the extra operating bar. The connector piece should have 2 pre-punched holes. Attach the connector piece on the opposite ends of operating bar placement.
113 in stock
FLEXfence has been tested for snow loads and wind. The Independent testing determined that FLEXfence Louver Hardware infill sustained a load application of 5.17 KPa (107.98 psf).
Additional information
Dimensions | 120 × 50 × 25 cm |
---|
Josh –
I spent a long time trying to find a solution to my newly built garden kitchen area and came across the FlexFence product. I have recently installed them vertically into areas areas which we wanted to keep the light pouring in, but close up when rain and wind hit. Thanks to the simple instructions I found it straight forward to fit, along with my locally sourced wood slats. Could not recommend this product highly enough.
RainRoom Ltd (verified owner) –
Easy to fit, strong and looks great. We spent some time researching systems for our Louvre panels to fit to our RainRooms. A lot of thought and experience has obviously gone into this product as it’s both strong and flexible and much more likely to stand up to Scottish weather than a metal equivalent.
Alan Vose –
What a great idea! just fitted one in our garden to give our gazebo a bit more shelter from the wind. Dead easy to put together! Really pleased with the result.
Turn Outdoors –
Glad you like it! Please feel free to share any photos you have of your finished project.